Books and Software on Boilers and Heat Recovery Steam Generators


Books
TitlePrice
USAOutside USA
Steam Plant Calculations Manual
Over 250 problems of interest to steam plant engineers solved
$79$90
Waste Heat Boiler Deskbook
  • How to specify waste heat boilers
  • Importance of gas and steam parameters and how they influence boiler design and performance
  • Water tube or fire tube boilers-when to choose what
  • Process applications-how it affects design
  • Temperature profile analysis-how to maximize energy recovery
  • High and low temperature corrosion and fouling aspects
$72$90

Software
Programs run on Windows 3.1 and later.
TitlePrice
Programs for Steam Plant Engineers
A collection of 22 programs on boiler duty, efficiency, steam properties, deaerator energy balance, expansion of steam, insulation performance, performance of bare/finned tube bundles, dew point of acid vapors, gas turbine exhaust burner calculations and more..
$250
Heat Recovery Steam Generators (HRSG)
Simulation of design/off-design performance of single, multi-pressure, unfired, fired HRSGs. Optimize temperature profiles, evaluate effect of steam/exhaust gas parameters on HRSG performance in seconds, compute fuel requirements for additional steam generation and see how firing affects the gas/steam temperature profiles, compare effect of different gas turbines on your HRSG performance, check if HRSGs meet guaranteed performance during field tests..and much more..(ideal for consultants, plant engineers, gas turbine users/suppliers and cogeneration engineers, planners of cogen projects)

Demo disk available.

$650


Two to four day courses on Steam Generators and Waste Heat Boilers are also offered to interested organizations.

V. Ganapathy has over 25 years of experience in the engineering and process performance aspects of steam generators, waste heat boilers, and HRSGs. He is the author of over 175 technical papers on boilers, steam plant calculations and HRSGs. He has written four books and his papers have appeared in Encyclopedia of Chemical Processing and Design.

His B. Tech. degree in mechanical engineering is from the Indian Institute of Technology, Madras; he also holds an M. Sc. (Eng.) in boiler technology from Madras University.


To buy these books or software, or for more information, contact:

V. Ganapathy
P.O. Box 673
Abilene, Texas 79604 USA

Tel: +1 915 677 9876/2011
Fax: +1 915 677 1420
Email: Rajammal@aol.com


11 January 1997